NOTE! This site uses cookies and similar technologies.

If you not change browser settings, you agree to it. Learn more

I understand

Bank Elektronik

logo


Our standard cells are availabe as sets, complete with cell body, top, Haber Luggin-capillary and counter electrode, or alternatively the customer is asked to put together his own arrangement. Depending on the individual set, these standard cells are widely used for general electrochemical tasks where the electrolyte volume does not rule the cell design.  

Base is a 0.5l - or 1l - cell body, made of heat shock resistant glass (DURAN) with or without double wall (heating jacket). The Teflon top is attached to a plane flange, offering different openings for electrodes, gas in- and outlet, thermometers and a reflow - condenser. A special adapter takes up workong electrode shaft and haber - Luggin capillary, in order to allow easy exchange of the working electrode wiothout dismantling the cell. The tip of the Haber Luggin capillary can be positioned exactly to the working electrody.

Models:

 


 

dnzelle-otherm-kl

CELL1 with thick-walled 0,5 l - plane flange beaker without heating jacket.Set consists of: PTFE - Top with 5 standard sleeve cones, adapter for working electrode shaft and Haber - Luggin - capillary. The small reference electrode is inside the  Haber-Luggin-capillary, avoiding troubles resulting from ruptured liquid junctions. With 2 NS / GL-adapters (NS14/GL18) for easy mounting of thermometers or glass tubes. Including AgCl reference electrode and Ti-Pt counter electrode 6 mm dia x 70 mm.  

CELL 11
Same set, but with double walled cell body (heating jacket)

 

 

 

 

 



dnzelle-mit-therm-kl
CELL2 with thick-walled 0,5 l - plane flange beaker without heating jacket,
Set consists of: PTFE - Top with 5 standard sleeve cones, adapter for working electrode shaft and Haber - Luggin - capillary, electrolyte bridge and separate vessel for the reference electrode. With 2 NS / GL-adapters (NS14/GL18) for easy mounting of thermometers or glass tubes. Including AgCl reference electrode (optionally calomel) and Ti-Pt counter electrode 6 mm dia x 70 mm

 

CELL 22
Same set, but with double walled cell body (heating jacket)

 

 

 


cv3-kl

 

CV - Cell
The double-walled CV - cell offers a nominal volume of 100 ml. The Teflon can be adapted to your needs, taking up separate compartments, feed-throughs,  etc. The cell is delivered with a stand, the teflon top allows gas-tight sealing. Optionally, one opening can be equipped with a cock for feeding probes from the environment.  

 


avesta-kl
Avesta - Cell
The AVESTA - cell for flat electrodes forms an opening of 1 cm², with "crevice-free" border. The border region of the working electrode is kept under fresh distilled water during the tests, while the open face of the electrode faces the test electrolyte. This special cell for pitting potential measurements is designed to avoid crevice corrosion along the border of the working electrode. The double walled cell has a volume of 0.5 l, it is delivered with stand, peristaltic pump, cell, reference electrode, counter electrode and reflow - condenser. Optrionally, special fixtures for round working electrodes are available, following the same principle.

 

 


 

Permeation1-12

Permeation Cell 0.5 L
Our permeation cells are made of heat resistant borosilcate glass. The permation foil or membrane is inserted between plane flanges of two half cells, clamped together by a mounting ring set. The membrane potential is picked up by Haber-Luggin-capillaries on each side. The Teflon cell top contains a variety of joints like the top of the standard cells.

 



CFperm150px
 
Permeation Cell 100 ml
This small permeation cell made of borosilicate glass got two separate counter electrode compartments to keep the bulk electrolytes on either side of the permaeation wall free of undesired products from the counter electrodes. Cleaning compartments between the main compartment and the counter electrode compartment have ports for electrolyte circulation or gas sparkling. They are separated both from counter electrode compartment and main compartment by glas frits.