{"product_id":"purionx-111-mechanically-reinforced-aem-8-x8-50-microns","title":"PurionX -111 | Mechanically Reinforced AEM (8\"x8\") | 50 microns","description":"\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eGeneral Information: \u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cp\u003e\r\n\tPurionX\u003cspan\u003e™-111 \u003c\/span\u003eis a mechanically reinforced Anion Exchange Membrane (AEM) with good hydroxyl anion conductivity, excellent mechanical stability, and high chemical stability in caustic or alkaline and oxidative environments. The polymer backbone for this membrane is based on a proprietary hydrocarbon resin and it has a thickness of 50~55 micrometers and currently offered in sheet form with physical dimensions of 8\" by 8\" (with a tolerance of +\/-0.2\").  The ideal alkaline electrolyte concentration for use with this anion exchange membrane is 1M (or 1 Molar). Yet, the membrane still performs well under conditions with less than 1M or pure water or greater than 1M concentration of electrolyte. The estimated longevity\/stability for this AEM product in 1M alkaline electrolyte is greater than 15000 hours at a temperature of 80 deg C.\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eApplication: \u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cp\u003e\r\n\tAEM Electrolyzer, AEM fuel cell, Electrodialysis, water treatment and others.\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eAdvantage: \u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cp\u003e\r\n\tHigh performance, scalable, low cost and highly durable AEM to help our customers to achieve high performance and long-term stability in their applications at a reasonable cost.\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eDelivery: \u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cp\u003e\r\n\tDelivered in the dry form and individually packaged inside sealed poly bags.\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eHandling and Storage: \u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cp\u003e\r\n\tKeep membrane package closed\/sealed when unused. Store, handle and process the membrane in a clean, dust-free environment. Only use new and sharp blades when cutting the membrane. Gloves should be worn when handling the membrane. The membrane should be handled with care: do not puncture, crease, or scratch the membrane, otherwise leaks may occur. All surfaces in contact with the membrane during handling, inspection, treatment, storage, and installation should be smooth, clean and free of sharp projections.\u003c\/p\u003e\n\u003cp\u003e\r\n\tLong term storage (\u0026gt;12 months) can be done in either dry or wet form with a sealed container. Wet form storage: Soak the membrane in DI water, neutral pH or alkaline aqueous electrolytes (e.g. NaCl, KOH).\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cstrong\u003ePretreatment: \u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cp\u003eInitial treatment should involve soaking the dry membrane in a sealed container of DI water for at least 8 hours to fully hydrate the material.  \u003c\/p\u003e\n\u003cp\u003eThe following procedure can be used to make the OH- form: (1) soak the membrane in 1M KOH in a closed container for over 12 hrs, (2) then rinse with deionized water copious time until pH neutral. The AEM in OH- form should be used in making the cell quickly or be stored in a sealed container in deionized water to avoid exposure to ambient CO\u003csub\u003e2\u003c\/sub\u003e.  Exposure of the hydroxyl form of the membrane to ambient carbon dioxide will naturally convert the hydroxyl anions in the membrane to carbonate as a result of the chemical reaction between these two species.  Carbonate form of any anion exchange membrane would have significantly lower ionic conductivity for typical alkaline electrochemical cells and this needs to be avoided especially the researcher is planning to use the membrane for alkaline fuel cell application.\u003c\/p\u003e\n\u003cp\u003e\r\n\tIf you have any questions about storage, performance and pretreatment, please feel free to contact us for further information.\u003c\/p\u003e\n\u003cp\u003e\n\u003cstrong\u003e\u003cspan\u003ePurionX-111 Technical Data Sheet\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"FCS","offers":[{"title":"Default Title","offer_id":57918124622150,"sku":"89010012","price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/5600\/3482\/files\/PurionX111b-reduced-2-228x228.png?v=1794917891","url":"https:\/\/www.thasar.com\/es\/products\/purionx-111-mechanically-reinforced-aem-8-x8-50-microns","provider":"Thasar S.r.l.","version":"1.0","type":"link"}