MTI  |  SKU: SP50KTCM

15KW Induction Heating and Melting System w/ Temp.-Controller & Multi-Cavity up to 2000°C - SP-50KTC-M

Regular price €0,00


Delivery and Shipping to EU

We will add in the quotation, the shipping, insurance, customs clearance costs.

15KW Induction Heating and Melting System w/ Temp.-Controller & Multi-Cavity up to 2000°C - SP-50KTC-M

MTI

SP-50KTC-M is a temperature-controlled induction melting system with multi-cavity, which can melt and solidify multi-alloy rods of 5-8 mm diameter at different compositions up to 2000°C (single cavity is also available). It is an ideal tool for high throughput material genome research to search for new generation alloys.

SPECIFICATIONS:

Induction Heater Working Voltage: 220V, 50/ 60Hz, Three Phase
Working Current: 5~52 Amps (60A breaker required)
Max. Input Power: 15 KW
Output Frequency: 30 - 80 kHz
Duty Cycle: 80%
Induction Coil: 150mm(OD) x 140mm(ID) x 65mm(H)
Air Cooling: Rear Fan
Protection: Automatic water pressure, over-temperature, and overpower protection
Refractory Assembling: Complete refractory assembling made of alumina, including bottom crucible support, crucible holder, and cover
Temp. Controller & Thermocouple Precision digital temperature controller with Automatic PID tuning
30 segments programmable for controlling heating and cooling rate as well as dwell time.
Overheating & thermocouple failure protection.
+/- 3 ºC temperature accuracy.
Thermocouple: C type (1/4"x10"L)
Continuous Working Temp. Range: 1000ºC~2000ºC
Max. Heating Rate:
10ºC/second (1000ºC-1200ºC)
8ºC/second (1200ºC~1500ºC)
3ºC~6ºC/second (1500ºC~1700ºC)
Graphite Crucible & Refractory liners High Purity Graphite Crucible: 2" OD x 1.57" ID x 4" Depth (4.3'' Height) Crucible with multi-cavity is included for induction metal melting (please select cavity diameter 6 or 8 mm when ordering)
6 mm dia. Cavity: 16
8 mm dia. Cavity: 12
Single cavity crucible is also available upon request.
Three-layer special design refractory liner can withstand temperature up to 2000°C.
Sealing Flanges & Quartz Chamber Two-end Open Quartz Tube is included with dimensions of 130mm(OD) x 122mm(ID) x 360mm(L)
Top Flange: Stainless steel hinged type flange with 1/4'' thermocouple feedthrough, needle valve, and barbed fitting.
Bottom Flange: Stainless steel flange with needle valve and KF-25 vacuum port.
KF25 right angle valve & clamps and SS bellows are included for connecting to the vacuum pump
Pressure Sensor Anti-Corrosive Capacitance Diaphragm Gauge (Gas Independent), measurement range up to 3.8x10E-5 torr
One 24V, 1A DC power adapter is included and ready to use. The input voltage for the adapter is 110~240V Single Phase
Flow Meter Compact Direct Read Flow Meter, 100-1000 cc/min. with 1/4NPT
Accuracy: 4%
Water Chiller Temperature range: 5 - 30°C
Water Flow Rate: 58 L/min
Water Tank: 15 Liters made of stainless steel
Note: It is recommended to use a specific coolant to get the best performance. It is normal to wait a couple of minutes for cooling down after several trials of heating
Note: the input voltage for the water chiller is 220V
Vacuum Pump One 156L/m Rotary Vane Vacuum Pump is included
Rate: 156 L/min up to 10e-2 torr vacuum.
Max. Power Consumption: 0.4KW / 0.37KW
If you choose a high-speed turbo-pump (optional), the vacuum level can reach 10-6 torr
Heavy Duty Mobile Cart Structure: Steel Frame Mobile Cart
600mm(L) x 800mm(W) surface for placing Induction Heater & Quartz Tube with Flange
Protective Shield For Non-UL Certified version, a protective shield made of phenolic sheets will be provided
For UL Certified version, a clear protective shield made of polycarbonate will be provided
The protective shield is to be placed around the quartz tube for safe operation
Compliance CE certified
NRTL certification is available upon request
Warning Attention: Protective inert gas must be continuously filled throughout the experiment in order to protect the graphite crucible and C thermocouple. The flow rate for gases should be limited to < 200 SCCM
The Induction melting system is designed for use under vacuum and low pressure < 0.02 MPa
Attention: A two-stage pressure regulator must be installed on the gas cylinder to limit the pressure to below 3 PSI for safe operation.
Never heat the furnace while the gas release valve is closed and a positive pressure condition exists within the furnace chamber. The pressure gauge must be used to closely monitor the chamber condition at all times during the heating process
Product Dimension Induction Heater: 520mm x 520mm x 450mm
Water Chiller: 460mm x 475mm x 762mm
Heavy Duty Mobile Cart: 600mm(L) x 800mm(W) x 597mm(H)
Net Weight 300 lbs