Kolibrik  |  SKU: ME-42SL400x80

MegaEIS™ ME-42SL400x80

€0,00

Delivery and Shipping to EU

We will add in the quotation, the shipping, insurance, customs clearance costs.

MegaEIS™ ME-42SL400x80

Kolibrik

The MegaEIS™ ME-42SL400x80 is a bi-directional workstation engineered for advanced testing of fuel cells, electrolyzers, and high-current battery modules. Featuring a combined source/load architecture, it handles up to 400 A and 80 V.

With 42 fully synchronized measuring channels, the system delivers true parallel EIS data across the entire assembly. This enables seamless, continuous charge and discharge cycling without switching external hardware, precisely capturing real-time impedance shifts even under aggressive dynamic loads.

 

Key Features

  • Designed for advanced fuel cell stack, electrolyzer, and battery module R&D
  • Bi-directional source/load architecture for continuous charge/discharge cycling 
  • Stack current up to ±400 A
  • Stack voltage up to 80 V
  • Maximum power capacity up to 32 kW
  • EIS measurement one cell gradually or all cells simultaneously
  • High-precision current sensing of both DC and AC components

 

Deployment Scenarios

  • High-Current Battery Module Cycling: Execute dynamic charge and discharge profiles on low-voltage, high-current battery modules. True parallel EIS captures state-of-health (SoH) variations across all 42 cells simultaneously during active operation, eliminating multiplexing delays and the need for manual probe reconnection.

  • Reversible Fuel Cell (rSOC) Validation: Evaluate cell stability and degradation by seamlessly alternating between power generation and electrolysis modes. The bi-directional hardware allows you to run continuous cyclic profiles and accurately measure impedance shifts without breaking the circuit or reconnecting cables.

  • High-Current Transient Diagnostics: Monitor the stack's response to severe power surges up to 400 A. The integrated low-impedance current sensor and fully synchronized architecture ensure highly accurate measurement of both AC and DC current components, free from the parasitic effects typical of external boosters.

Technical Parameters

Power supply 110 … 240 V AC / 50 … 60 Hz
Dimensions Modular deign for 19“ rack cabinet
Protection rating IP20
Input voltage 0 … 80 V
Total input current
Total input current (internal + external load)		 Up to 400 A
Internal load current
 0 … 400 A
Max. internal power dissipation 32 kW
Cooling Water
Sampling 24-bit ADCs, low-noise 50/60 Hz filtered sampling
Up to 1.25 Msps for EIS measurements
Measurement resolution 0.001% of selected range
Accuracy Voltage: ≤ 0.1% of range + 0.1% of reading
Current: ≤ 0.1% of range + 0.5% of reading
Acquitions methods Constant V, I, Open circuit, Manual control, Chronoamperometry, Chronopotentiometry, Linear sweeps, Polarization curves, Current interruption, Load cycling/profiling, EIS – electrochemical impedance spectroscopy, Programmable sequences of all available methods
EIS frequency 1 mHz ... 100 kHz
EIS amplitude Up to 20% of maximum internal current for < 1 kHz
2× voltage probe with EIS Up to ± 200 V
EIS channel voltage range ± 5 V (max. voltage span over one EVM8 module: 24 V / each 8 channels)
Number of EIS channels Up to 40+2 (limited by max. voltage)
8 channels per one module
Connection USB 2.0, Ethernet
Software Control software for MS Windows
Features: measurement setup and control, data acquisition, processing and visualization, pascal or python scripting, remote control by TCP/IP server for integration with top-level control system, examples for remote control using Python or LabVIEW.

If these variants do not suit you, please contact us, we offer customized solutions!

Back to top