FCS  |  SKU: 11100001

1/8" Push-to-connect fitting

Regular price €0,00

Default Title

Delivery and Shipping to EU

We will add in the quotation, the shipping, insurance, customs clearance costs.

1/8" Push-to-connect fitting

FCS

Push-To-Connect fittings that are compatible with Flex-Stak Assembled, Flex-Stak Electrochemical Cell, and Direct Methanol Fuel Cell Flex-Stak hardware.  

Technical Specifications:


• Pressure range: 0 - 150 psig @ 130 ºF
• Vacuum: 0 - 29.5" Hg
• Temperature range: 32 - 140 ºF
• Media: Air, non-corrosive water, hydrogen, 1M or less methanol (in deionized water) solution
• Tube Pull Out Force: >20 lb. @ 75 ºF
• Burst Pressure: 350 psig @ 75 ºF
• Materials: Body -  Plastic resin; Metal Stud - Nickel Plated Brass; Gripper Ring - Stainless Steel; Seals - Nitrile

Installation of Tubing Into Fitting:


• Slowly push a clean and perpendicularly cut tubing into the fitting until it comes to a dead stop.
• Pull the tubing back gently until the Gripper Ring of the fitting grips onto the tubing and has a good seal.

Removal of Tubing From Fitting:


• Push in evenly on the two long oval sides of the Release Button.
• Pull out the tubing while keeping the Release Button depressed.
• To reuse the tubing: Cut off the lodged portion of the previously used tubing evenly and perpendiculary.