1 2
MTI  |  SKU: OTF1200XIII-PGEP

1200C Max. Ultrasonic Spray Pyrolysis 3-Zone Furnace for Nano Particles Synthesis - OTF-1200X-III-PGEP

€0,00

Delivery and Shipping to EU

We will add in the quotation, the shipping, insurance, customs clearance costs.

1200C Max. Ultrasonic Spray Pyrolysis 3-Zone Furnace for Nano Particles Synthesis - OTF-1200X-III-PGEP

MTI

OTF-1200X-PGEP is a versatile ultrasonic spray furnace system designed for nano, core-shell structured particle synthesis.  The system consists of three major modules: 1.7MHz ultrasonic enhanced bubbler, 1200ºC Max. 3-zone heating tube furnace, and Electrostatic Precipitator.   The processing steps of a particle include aerosol generation, thermal decomposition, and nanopowder collection. Such a system enables advanced synthetic method that provides control over particle size, morphology, and nano/microstructure.

SPECIFICATIONS
System Structure
  • Aerosol Generation: 1.7 MHz Ultrasonic Enhanced Bubbler can "evaporate" catalyst liquid with no heat generated. A stainless steel liquid collector connected in line with the ultrasonic bubble can prevent condensing liquid from streaming into the furnace tube chamber. 
  • Thermal Decomposition:  three-zone ( 900mm length ) tube furnace can be heated up to 1200C maximum to pass the droplets flux across the temperature and atmosphere-regulated firing zone, chemical, and physical conversion processes proceed.  
  • Nanopowder Collection: 30KV  electrostatic precipitator (700 ml ) can effectively collect nano-size particles from the carrier gas flow
  • The furnace can be tilted to avoid liquid flow back  atomizing tank
Tube Furnace -
Thermal Decomposition



 		Voltage & Power
  • Single Phase, 208V~240V AC, 50/60 Hz   (30A breaker required)
  • Max. 7 KW
  Working Temperature
  • 1100oC  continuous
  • 1200 oC  Max. < 1 hours
   Max. Heating / Cooling Rate
< 20oC / min 
Heating Zone & Constant Temperature Zone
  • Three heating zone, 300+ 300 + 300 mm ( 900mm L total)
  • Constant temperature zone:   600 mm with +/- 2oC ( if 3 zone at same )
    Heating Elements
  • Fe-Cr-Al Alloy doped by Mo
Temperature Controller
  • Three digital temperature controllers with 30 programmable segments for precise control of heating rate, cooling rate and dwell time.
  • Built-in over-temperature alarm and protection allow for the operation
  • +/- 1 ºC temperature accuracy.
  • RS485 Communication Port.
  • Precision Eurotherm controller is available with +/- 0.1 oC accuracy
Processing Tube
  • One fused quartz tube is included with ID 20.5 x OD 25 mm x L 1400 ( mm)
Sealing Flanges
& Fittings
  • Left side sealing KF flange which connects atomizing bubbler and 1" quartz tube with vacuum gauge.
  • The right side KF flange connects to the electrostatic precipitator. 
Left               Right  
Aerosol Generation

      
 Ultrasonic atomizing bubbler
  • 220VAC, 1.7 MHz Ultrasonic Generator
  •  Ultrasonic power is adjustable with 8 levels
  • 316 Stainless Steel liquid container with a fluoropolymer sealing ring
  • The continuous or timed mode can be set. For timed mode, time can be adjusted from 30 minutes to 180 minutes.
  • A liquid injection pump is equipped with a 60 ml plastic syringe. The speed range for the liquid injection pump is 0.004 ml/min - 70 ml/min
  • A flow meter is included to control the carrier gas within 0-200 SCCM.
  • A mass flow controller (MFC) is optional to precisely control the flow rate.
Nanopowder Collection
High Voltage Supply
  • AC 220V 50/60Hz, 30 W Max. power consumption
  • Digital Voltmeter and Current meter, 30KV, 1.0 mA max.
  • Output voltage and current can be set by using knobs on the front panel and read from the digital display
  • Built-in Arc Protection Circuit
Electrostatic Precipitator

   
  • A KF25 quick clamp and flange enables the quick coupling to the furnace processing tube
  • Another KF25 port is built-in with the collector to connect the vacuum pump (The vacuum pump is required, but do not included in the standard package.)
  • PTFE plates are installed on top and bottom to insulate high-voltage electrodes
  • 12mm gas outlet built-in
  • The electrode rod is in the shape of a cross, increasing surface area compared to cylindrical electrodes
  • Adjustable supports keep the collector leveled with the furnace tub
  • Double layer design, please check the picture shown on the left
Net Weight ~150Kg
Dimensions ( click the picture to see details)
Warranty One-year limited manufacturer warranty with lifetime support (consumable parts such as furnace liner, processing tubes, and O-rings are not covered by the warranty, please order replacements at related products below).
Laptop, software & WiFi Control (Optional)
    
  • Brand new laptop with Microsoft Windows 10 and Microsoft Office 2013 
  • Labview-Based Temperature Control System (EQ-MTS01) enables the user to edit temperature profiles, manage heat-treatment recipes, and record and plot data for MTI furnaces.
Compliance
Back to top