1700C Max Dual Controllers High Temperature Muffle Furnace (12x12x16", 36L) -KSL-1700X-A4-DC

• Double shell steel case with a cooling fan to keep outside case at a lower temperature
• High purity alumina fiber insulation for max. energy saving
• High purity alumina (1765°C) coating inside the chamber for longer service life
• Universal digital power controller which can be used 50 - 60 Hz worldwide

• The primary controller and thermocouple dominate the user-defined heating program and main alarm system.
• The monitoring controller only monitors the real temperature by the other thermocouple and activates the secondary alarm system when the failure of the primary controller to ensure safety.

• 30 programmable segments for precise control of heating rate, cooling rate and dwell time.
• Built-in PID Auto-Tune function with overheating & broken thermocouple broken protection.
• Over-temperature protection and alarm allow the operation without attendant(s).
• +/- 1 ºC temperature accuracy.
• PC control ready. Cable and software are included.

• You may upgrade the temperature controller to the Eurotherm Temperature Controller which provides +/- 0.1ºC accuracy. This package includes a Eurotherm programmer, a communication cable (RS485 - USB), and a software CD. Click the pic left to view the full spec of the Eurotherm temperature controller. (Pic. 1)
• Touch screen control panel version is available upon request, which can pre-store 5 programma (Pic. 2)
• Pic. 1 Pic. 2 ( KSL-1700X-

• Brand new laptop with Microsoft Windows 10 and Microsoft Office 2013 (30 days free trial) for immediate use.
• Labview Based Temperature Control System (EQ-MTS01)enables users to edit temperature profiles, manage heat-treatment recipes, record, and plot data for MTI furnaces.
• A wireless remote control provides up to 300 meters of operating range.

• The gas inlet is 1/4 O.D tube fitting installed in the left panel of the furnace
• The gas outlet is installed in the top of the furnace.
• A 160 scm float meter is built in the front panel with an adjusting knob. (Click the pic in the left column)

• AC 208V-240V single phase, 50/60 Hz (a 65A power line is recommended.)
• Max. current: 50A 
• Max. power: 10KW
• The power cable is included, but without a plug

• 1600°C or 2912° F (continuous)
• 1700°C or 3092° F (< 1 hour)

• 2.5°C /min from RT- 200°C (Cold Start)
• <5°C / min from 200-800°C
•  5°C / min from 800-1600° C

• +/- 5°C @ 1200°C in the center 150 x 200 x 250mm area

• Net weight: 350Kg

• Chamber: 300 L x 300 D x 400 H mm (12 L x 12 D x 16 H inch) 36 Liter
• Overall: 650 L x750 W x1500 H mm ( 26"x 30" x 59" )
• 

• 900 lbs, 48" x 40" x 80"

• CE Certified. 
• NRTL or CSA certificate is available. at extra cost. )

• The cooling rate shall also not exceed 10 °C /min. 
• Toxic or explosive gases are not recommended for use with this furnace without necessary safety controls and supervision. 
• Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with alumina coating.
• A refractory door block must be inserted before the closing door.

Operation Instructions