1 5
MTI  |  SKU: GSL-2300X-C

2300°C Max. Induction Heated Tube Furnace (30 mm ID Graphite Tube) with IR Temp-Controlled - GSL-2300X-C

€0,00

Delivery and Shipping to EU

We will add in the quotation, the shipping, insurance, customs clearance costs.

2300°C Max. Induction Heated Tube Furnace (30 mm ID Graphite Tube) with IR Temp-Controlled - GSL-2300X-C

MTI

GSL-2300X-C is an induction-heated horizontal tube furnace equipped with an infrared (IR) temperature sensor and controller. It has a maximum working temperature of 2300°C and features a graphite tube with a 30 mm inner diameter, surrounded by thermal insulation and enclosed in a 4" quartz tube with vacuum flanges and valves.

Specifications

Induction Heater Working voltage: 208–240V AC, three-phase, 50/60 Hz
Working current: 96A (100A circuit breaker required)
Maximum input power: 35 kW
Output frequency: 80–200 kHz, adjustable
Duty cycle: 80%
Air cooling: Rear fan
Protection: Automatic water pressure, over-temperature, and overload protection
Induction Coil and Heated Tube Water-cooled induction coil: 135 mm ID × 300 mm L
Fused quartz tube: 100 mm OD × 90 mm ID × 700 mm L
Graphite tube: 40 mm OD × 30 mm ID × 300 mm L
Thermal insulation: High-purity carbon felt
Optional YSZ ceramic coating for the inner surface of the graphite tube, available for carbon-sensitive materials
Vacuum Sealing Flanges Left flange: IR temperature sensor, gas inlet, and pressure gauge
Right flange: KF25 port for vacuum pump and gas outlet valve
Vacuum level:
10-2 torr with mechanical pump
10-5 torr with turbopump
Optional digital vacuum gauge with measurement capability down to 4 × 10-5 torr, available at an additional cost
Temperature Controller & Sensor 30 programmable segments for precise control of heating rate, cooling rate, and dwell time
Temperature sensor: Infrared (IR) sensor manufactured in Germany
Maximum working temperature: 2300°C (less than 60 minutes)
Continuous operating temperature range: 1200–2200°C
Constant temperature zone: 60 mm ±5 mm
Maximum heating rate:
≤1600°C: 40°C/min
1600–2300°C: 30°C/min
Maximum cooling rate: 30°C/min (1000–2300°C)
Temperature accuracy: ±2°C
Water Chiller Water cooling with a flow rate greater than 116 L/min is required for cooling the induction coil.
Vacuum Pump Vacuum level: Approximately 5 × 10-2 torr with a mechanical vacuum pump
Vacuum level: Approximately 10-5 torr with a turbopump
Compliance NRTL certification is available upon request at an additional cost. Please contact us for a quotation.
Net Weight 300 lbs
Back to top