5T Max. Precision Programmable Nail Penetration Tester ( 0.01 - 500mm/m) w/ Heating Oven - MSK-TE500

Power

• AC 110-240V Single Phase, 50/60 Hz 
• 1000W
• 20 A air creaker is required
• A 10 ft power cable without a plug

Penetration Speed & Force

• The penetration nail is driven by a servo motor with a precision lead screw
• Penetration force:        100N -  50KN  ( 5T)  measured by precision load sensor with +/- 0.5% accuracy
• Moving speed:              0.01 mm/minute  --- 500 mm/minute programmable via PC
• Travel distance         300 mm Max with position accuracy +/- 0.005 mm 
• Sample fixture:              Not included, but available based on customer design at the extra cost

 Heating Chamber

• A convection heating oven with inside dimensions 350x350x350mm is put on the bottom
• Oven power: 220oC +/-10% , 2500W
• The nail can pass through the oven via the hole on the top of the oven
• 30 segments programmable temperature controller is included at a remote location with +/- 1oC accuracy
• Max. working temperature 200oC
• One 2" venting port is included for connecting to the lab venting system
•  One 1" cable feedthrough port  is included for connecting related  electronic device
• One 1/4" ss tube with a solenoid valve is inserted into the tube and connected N2 tank. Once the oven temperature > 250oC, N2 gas will blow N2 gas into the oven to reduce firing

 Steel Nail

• The nail is available upon request, not included

Control Panel

• The device is controlled by a remote laptop computer to program penetration speed and depth
• The laptop and Software are included for immediate use.

 Explore-proof  Chamber

• Internal Chamber size: 750 W x 700 D x 1900 H, mm
• Double-layer steel chamber for explosion containment
• Inside chamber: made of 1.5 mm thick cold-rolled SS304 with tensile strength > 500 Mpa
• Outside casing: made of 1.5 mm thickness annealed A3 steel with Tensile strength > 400 Mpa
• Explosion containment window: 280 x 280 mm  
• Double layer 5 mm thick explosion containing glass with double-sided shard holding the film to ensure broken glass can not fly out in the case of explosion
• 4“ Venting port and pressure release door is built in the back of the chamber (Pic. 4)
• Battery Placement Area: 310 x 310 x 340 mm
• Max. Payload: 60Kg
• A Four-wheel is installed on the bottom for movable
  

Dimension & Weight

• Dimension:  L 600 mm x  W 400 mm x  H 2000mm
• Net Weight:  ~700 kg

Warranty 

• One-year limited warranty
• Consumable parts such as penetration nails, thermocouples, and battery fixtures are not covered by the warranty
• Any damage caused by battery fire and corrosion is not covered by the warranty

Compliance

• CE Certified
• NRTL certification (UL61010)  or CSA certification is available upon request at extra cost.