Automatic Winding Machine for Small Cylindrical Cell up to ( Max. 21 Dia. x 60 L, mm) - MSK112RA60

• Suitable for electrode winding of small cylindrical cells ( Max. 21 mm diameter x 60 mm length) with both tapped or tabless structures.
  
• Product yield of 8 - 16 cells per minute
  
• Winding tension controlled
• PLC control, touch screen setting.
  
• Dimension:  L2400mm x W1300 mm x H1900mm
• Weight：    2000 Kg

• Single-phase AC208 V-240V±10%, 50/60Hz， single phase
• Power:  5000W

• Cathode and Anode width:      13～58mm±0.1 
• Cathode and Anode length:    13～58mm±0.1 
• Electrode roll:      ID 3" OD 400 mm
• Separator strip width:               15～60mm±0.2
• Separator roll:      ID 3", OD 250 mm 

Process Flow Diagram

• Power：           220VAC +/-10%, single phase, 50/60Hz, 5.0KW
• Compreve air:  0.5-0.7mpa²，400 L/min。(12mm tube )；
• Vacuum:          -90kPa～-50kPa，250 L/min。(12mm tube )；
• Room Temp.  : 10-30℃，Humudity:  30～70％；
• Environment:    No corrosive gas and liquid, or explosive gases. 

• Electrode strip width tolerance:  < 0.1 mm
• The electrode sheet's S-bend must be less than 1 mm/m,
  and the wavy edge less than 0.5 mm/m; edge curling is not permitted.
• The separator roll's alignment must be less than ±0.2 mm, and there shall be no edge curling.
• When using the tab, a bare section must be left at the leading edge.