Quick Assembly Split Coin Cell ( 20mm ID) for Battery Material testing, No More Crimper - HSTC

• Easy cell assembling by "thread-in" the bottom contacting plate and top plunger into the PTFE body.
• Stainless Steel contact plate and plunger.
  
• The Body is made of PTFE body with Max. 200°C working temperature 
• The air-tight design ensures zero electrolyte leakage
• Easy to separate and clean after use
• Same functionality as "Swagelok Type Cell" but with more size options for electrodes and separators.
• O-ring is a kind of a kind of FKM with partial fluorination, which has a good anti-corrosion property in regular battery electrolytes. 
• The spacer inside the test cell presses down on the electrode and prevents the electrode from curling
• Directly clamp on MTI battery analyzer without wire connection for quick testing
• Extending rod included for each electrode
• O-ring is made of fluorine rubber to ensure no liquid electrolyte leaking

• The test cell can be gold plated for extra corrosion resistance, please chose from the personalization section.
• Please click here to order your own gold plating kit.
• Note: Customized (Au-coated) test cells are non-returnable and non-exchangeable.

• Standard diameter that can be put inside 20mm Diameter Max

• max. the thickness of the material that can be inserted is up to 6mm

• Max. 100 ºC (Nylon material)

• The test piece is compressed and held in place by one compression spring.
• Material: SUS 304
• Spring Rate / Stiffness: 7.9 N/mm (806 g/mm)
• Dimensions when free: 5 mm OD × 3.4 mm ID
• Length under maximum compression: 7.2 mm
• Please contact MTI to order replacement springs.

• Anti-corrosive Au coating on the base contact plunger and inserts is available upon request
• Note: Customized (Au-coated) test cells are non-returnable and non-exchangeable.

• You may need a disc cutter to make electrodes ( Click Pic 1 to order )
• To perform a parallel test for multiple cells, simply arrange them in a dock station a
• MTI multi-channel battery analyzer for cycle life, coulombic efficiency...testings. Please email us about the availability of such a station. (Click Pic 2 to order )

                (Pic. 1)   Pic.2

• Enhanced Electrochemical Lithium Storage by Graphene Nanoribbon. STC20-split flat cell (MTICorp., Richmond, CA) was used for the present studies.
• The warranty does not cover any corrosion or misuse caused by the end-user.