Large Multi-Functional Vacuum Sealer For Pouch Cell (650x340x20mm) - MSK-115B-H700

• AC 220V +/- 10%, 50/60Hz. single phase
• Power consumption: 3 KW
• A power cable is included, but no power plug

Pouch cell size & Pressure Board

• Maximum pouch cell size: 650mm(L) x 340mm(W) x 12mm(T) 
• A spring loaded pressure board to squeeze air from the stacked cell in pouch cell before vacuuming
• Produces a much tighter and neater sealing results

Control Panel

• 7" touchscreen panel controls all necessary parameters for automatic operation, including: Purge pressure and duration, Sealing mode, Sealing temperature, etc. 

Back Panel & Side Panel

• Inert gas & compressive gas port on the side panel, and vacuum ports are installed on the back panel
• You need an air compressor to operate ( optional, click above Pic. 1 to order)
• You need an inert gas tank to purge the chamber (not included)
• Pic. 1 Pic. 2 

• Copper made a sealing blade with rubber buffer (soft-sealing)
• Sealing mark size: L650mm x W6 mm (The sealing blade depth and width could be customized at an extra cost)
• Parallelism tolerance: 0.04 mm

• Maximum: 0.6 MPa (Via 230 Kg.f)
  
• Max, 250°C adjustable with control accuracy of +/-5°C for both upper sealing blade and lower sealing blade. ( With Teflon tape applied, the maximum temperature is 220°C)
• Vacuum standing time： 0 - 900 s Adjustable
• Heated sealing time: 0 - 90 s, adjustable (Recommended: 3 - 8 seconds）
  

• Dimension: L1143mm x W761mm x H885mm
• Weight: ~410 Kg

• CE Certified
• NRTL or CSA certification is available upon request at the extra cost

• This is heavy equipment. Please use a Forklift to move in or out from the glovebox!