Máquina de corte longitudinal de microelectrodos rollo a rollo (3 - 10 mm de ancho) - MSK-CSC-350

The micro-battery electrodes slitting machine MSK-CSC-350

• Designed for the micro-batteries, typically, the Bluetooth batteries.
• Multiple (4+) narrow electrode strips slitting
• High precision / Tension control / Without the defects such as flounces, burrs, and indentation

Specification

Working Voltage	380V AC, Three-phase, 50/60 Hz
Power	10 kW
Compressed Air	Compressed air of 0.7 MPa is needed for the operation of this machine Please note the air compressor is not included. Please click the picture below to order one at MTI, or order it from your local hardware store Attention: If a gas cylinder is used instead of an air compressor(pic2), a two-stage pressure regulator(pic1) must be installed on the gas cylinder to limit the pressure within the required working range for safe operation. Click here to learn the installation of a gas regulator.   pic1              pic2
Reeling and Unreeling	Automatic Tension control: 0 - 100 N, +/- 2 N; Maximum Reeling Diameter: 350 mm Maximum Unreeling Diameter: 450 mm Automatic unwinding correction, accuracy ± 0.5mm
Cutting Width	Total cutting width: 300 mm, Each electrode strip range: 3 - 10 mm width, No flounces, burrs, and indentation 4 or more narrow electrode strips slitting; the widths of the electrode strips are preset and fixed Replace the space jacket to manually adjust the width at extra cost
Cutting Thickness	10 um - 300 um
Cutting Speed	0 - 40 m/min