Single Channel Potentiostats

Emstat4S
USB powered potentiostat / galvanostat with EIS 
  • Two versions: Low Range and High Range

  • Potential range ±3 V or ±6 V

  • Max. current ±30 mA or ±200 mA

  • FRA / EIS: 10 μHz up to 200 kHz

PalmSens4
Compact, versatile and powerful
  • Potentiostat / Galvanostat / Impedance Analyzer

  • FRA / EIS: 10 μHz up to 1 MHz

  • 9 current ranges: 100 pA to 10 mA

  • 18-bit resolution

  • Bluetooth or USB connection

CompactStat.h
Ivium’s flagship for lower currents
  • 30mA/10V
  • Options to 200V & 1.25A
  • Lowest noise, sub-pA true capability
  • BiStat & True Linear options
  • EIS to 3MHz
  • 24-bits resolution (0.00001% of Current Range)
pocketSTAT2
Portable potentiostat with full 4-wire EIS
  • ±30mA / ±10V
  • EIS: 10µHz-1MHz
  • Battery and BlueTooth Module
Sensit Smart
Smartphone potentiostat
  • Capable of EIS up to 200 kHz
  • Built around the EmStat Pico module
  • Potential range -1.7 to +2 V
  • Current ranges 100 nA – 5 mA (max ±3 mA)
Sensit BT
Handheld and wireless dual-channel potentiostat
  • Capable of EIS up to 200 kHz
  • Built around the EmStat Pico module
  • Potential range -1.7 to +2 V
  • Current ranges 100 nA – 5 mA (max ±3 mA)
  • Can be used without PC or smartphone connection
EmStat4R
Ruggedized potentiostat with battery & Bluetooth
  • Portable: battery, Bluetooth and rugged housing
  • Available with connection module for sensor cable or SPE
  • Potential range ±3 V
  • Max. current ±30 mA
  • Optional impedance analyzer: 10 μHz up to 200 kHz





Vertex Series
Vertex Series Low cost range of flexible potentiostats:  
  • Models up to 10Amps and 20V
  • EIS: 1MHz
  • Optional True Linear Scan
NEW! Vertex C
Vertex C Low cost Potentiostat / Bipot
  • Compliance ±350mA / ±13V
  • FRA/EIS: 10µHz-1MHz
  • Optional Bipotentiostat (±35mA / ±10V)
Vertex.One
Vertex.One Low cost 100mA potentiostat
  • Current compliance ±100mA
  • Maximum output voltage ±21V
  • Optional EIS to 1MHz
IviumStat.h
IviumStat.h Ivium’s flagship. Combines CompactStat’s low noise with higher current & 8MHz EIS
  • 5A/10V (options to 50V & 10A)
  • EIS to 8MHz
  • 1pA Range / 0.00001% of range resolution
XP Ivium
Ivium XP Integrated High Power Potentiostat
  • XP40 (±40A/±10V), XP20 (±20A/±20V), and XP10 (±10A/±40V)
  • Applied voltage range on all instruments is ±10V
  • Optional FRA/EIS: 10µHz to 500kHz
    Integrated current interrupt
  • Direct K-type thermocouple input connector
IviumBoost
IviumBoost Series of power boosters for use with selected Ivium potentiostats.  Using boosters as appropriate the Ivium range extends to over 300 Amps and 200V
  • Available up to 100A
  • Available up to 100V
OGS series Origalys
OrigaStat - With Built-in Electrochemical Cell
  • Build-in electrochemical cell:
  • Plastic cover
  • Electrode holder
  • Beaker holder
  • Base
  • Warranty: 5 years
OrigaFlex Series
Potentiostat Galvanostat
  • Connector for Battery holder
  • Temperature probe
  • Extentable to Multi-Potentiostats
  • Impedance in Option
  • Good Value for money

Multi-Channel Potentiostats

OctoStat
8-channel multipotentiostats with either 30mA, 200mA or  5A and EIS per channel. 16A booster includes parallel operation to 128A
  • 8-channel Potentiostat/Galvanostat/ZRA
  • 19" rack-mountable housing
  • Up to 128 channels/rack
  • Affordable high-spec electrochemical test system
  • Each channel: Dedicated embedded FRA/EIS
Ivium-n-Stat
Modules from 30mA to 10Amps and up to 32 independent potentiostats in a single chassis.  Each module can be operated in floating mode (galvanic isolation) via software selection.
  • Up to 8 modules/32 channels per frame (stackable up to 64 channels) can be installed
  • Modules can be mix and matched for maximum versatility
  • Integrated impedance analyser in each channel as standard: 10µHz - 250kHz (1MHz optional)
IVICycle
32 Channel System.  Each IviCycle comprises 4 x potentiostat modules each comprising 8 x 30mA or 200mA independent potentiostats with EIS
  • Multi-channel battery test system
  • Each channel: ±30 mA up to ±3 A/±5v or 10V
  • Optional FRA/EIS: 10µHz-20kHz on each
    channel for simultaneous testing
  • 19" rack-mountable housing
  • Low cost-per-channel battery test solution
MultiPalmSens4
Multi-channel Potentiostat / Galvanostat / Impedance Analyzer 
  • 4 to 10 channels available in different configurations
  • FRA / EIS: 10 μHz up to 1 MHz
  • 9 current ranges: 100 pA to 10 mA
  • potential range: ±5 V or ±10 V
MultiEmstat4
Multi-channel Potentiostat / Galvanostat / Impedance Analyzer 
  • Available with 4, 8 or 12 channels
  • FRA / EIS: 10 μHz up to 200 kHz
  • Potential range: ±3 V (LR) or ±6 V (HR)
  • Max. current: ±30 mA (LR) or ±200 mA (HR)
OrigaFlex
Plug and play systems. Assemble, according to your needs, your own potentiostats and galvanostats multichannels to obtain a customized system of multi-potentiostats and galvanostats with Dummy Cell and Power Supply.
  • Maximum current ranges: ±500 mA up to ±10 A
  • lowest Ranges:±5 nA to ±500 mA
  • highest ranges:±100 µA to ±10 A
  • Applied Potential: ±15 V
  • Compliance:±20 V