MTI

100L Programmable Temperature & Humidity Thermal Test Chamber (-40°C to 150°C) - MSK-TE906-H100P

€0,00

Entrega y envío a la UE

Añadiremos en el presupuesto los gastos de envío, seguro y despacho de aduanas.

100L Programmable Temperature & Humidity Thermal Test Chamber (-40°C to 150°C) - MSK-TE906-H100P

MTI

MSK-TE906-H100P is a programmable temperature & humidity test chamber designed for safety testing of lithium-ion batteries and battery packs. It simulates controlled environmental conditions to evaluate battery safety performance under various temperatures and humidity. The chamber provides a temperature range of -40°C to 150 °C and a relative humidity range of 20% to 98% RH.

SPECIFICATIONS:

Power Requirement 
  • Working Voltage: AC220V±10%, Single Phase, 50Hz
  • Output Power: Approx. 5KW
Test Chamber 
  • Exterior chamber constructed from powder-coated galvanized steel; interior constructed of SUS304 stainless steel.
  • Insulated with rigid polyurethane foam and ultra-fine fiberglass 
  • Internal Chamber Dimensions: 500mm x 400mm x 500mm (W x D x H)
  • Maximum chamber load capacity: 20 kg/m^2
  • Includes three adjustable sample racks.
  • Equipped with two Ø100mm access ports with rubber plugs
Chamber Door 
  • Hinged chamber door with a hollow-glass observation window
  • Built-in chamber illumination for clear interior visibility 
Cooling & Heating System 
  • Temperature Range: -40 °C to 150 °C
  • Temperature Resolution: 0.01 °C
  • Temperature Uniformity: ≤±2 °C
  • Heating Rate: average 5 °C/min under non-linear load, from -40 °C to 75 °C
  • Cooling Rate: average 1 °C/min under non-linear load, from 75 °V to -40 °C
Humidity Control
  • Humidity Range: 20% to 98%
  • Relative Humidity Deviation: ≤ ± 3.0% RH
Control Panel
  • 7-inch TFT color LCD display
  • Program mode and constant value mode are selectable
  • Display Resolution: Temperature: 0.01 °C; Time: 0.01 min; Humidity: 0.1% RH
Noise Level 
  • A-weighted sound level ≤ 65 dB(A)
Safety Protection 
  • Over-temperature protection for the test chamber
  • Thermal fuse for the test space
  • Fan overheting protection
  • Leakage protection circuit breaker
  • Emergency pressure relief port with a rupture disk on the side of the equipment  
  • Water supply, drainage, and abnormality protections
Water Storage 
  • 18 L portable drawer-type water tank on the right side of the chamber
Compliance 
  • CE 
  • NRTL or CSA certification is available upon request at an extra cost.

 

Volver al principio