Economic Powder Resistivity & Compaction Density Measurement System up to 300Kg Loading - MSK-PRT-300

• AC110V or 220V±10%, 50/60 Hz, single phase
• 10 W

Control of the computer

• A laptop with software is included as a control panel for measurement of powder compaction density and resistivity (applied pressure can be up to 30 MPa)
• All data and curves are recorded into a computer

• 10^-5～2×10⁵Ω/cm with 8-segment range
• Accuracy: +/- 5% in full range

Testing voltage range

• 10mV ～ 100 mV

Testing Current Range

• 0.1μA，1μA，10μA，100µA，1mA，10mA，100mA
• Current resolution: ±0.1% of full range

 Powder sample cup

• The sample cup is made of plastics
• 4 conductive electrodes are installed on the top plug of the cup， which has a diameter of 11.28 mm.
• Inside area of the sample cup: 1 cm2
• Sample thickness: 0～ 20 mm (position sensor with accuracy ±0.02mm).

 Force of pressing

• Force is applied manually via a hand wheel
• The pressing force is measured by a digital load sensor.
• Pressing force: 0 - 300Kg measureable
• Pressure range: 0 - 30 MPa with accuracy ±0.01 MPa

Environmental Use Conditions

• Working temperature: -10℃～+40℃，
• Humidity: ≤65%RH
• This device can be operated in a glovebox with Ar gas

Dimension

• L 250mm × W220 mm × H540mm

Weight

• ~10 kg